I am a hardware designer tasked with coming up with HS2 compatible DLL's to suit a vendor requirement. We have a single tap JTAG for our project and have procured dozens of HS2 cables.
Can you please point me to code snippets that could do the following,
I looked into sample code in digilent.adept.sdk_v2.4.2\samples\djtg\DjtgDemo\DjtgDemo.cpp, but it is not clear to me how I could translate it to the commands that I would need.
Question
ARP
Hi,
I am a hardware designer tasked with coming up with HS2 compatible DLL's to suit a vendor requirement. We have a single tap JTAG for our project and have procured dozens of HS2 cables.
Can you please point me to code snippets that could do the following,
1. INT32 openc(const char * ipaddress, const char * port)
2. INT32 readmem(UINT32 memAddress, INT32* valptr)
3. INT32 writemem(UINT32 memAddress, UINT32 val)
4. void closec()
I looked into sample code in digilent.adept.sdk_v2.4.2\samples\djtg\DjtgDemo\DjtgDemo.cpp, but it is not clear to me how I could translate it to the commands that I would need.
Thank you.
ARP
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.