I have recently upgraded Xilinx Vivado to 19.1 and attempted to setup the Arty Echo Server example on my Arty A7-35 board. The bit stream gets generated without any errors as does the SDK portion of the project. After the bitstream and program is loaded onto the Arty however nothing happens. I receive nothing from the UART stating the server has started. I have successfully ran the echo server example when using Vivado 18.3. Has anyone else ran into this problem?
Question
newkid_old
I have recently upgraded Xilinx Vivado to 19.1 and attempted to setup the Arty Echo Server example on my Arty A7-35 board. The bit stream gets generated without any errors as does the SDK portion of the project. After the bitstream and program is loaded onto the Arty however nothing happens. I receive nothing from the UART stating the server has started. I have successfully ran the echo server example when using Vivado 18.3. Has anyone else ran into this problem?
Thanks in advance.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.