NetFPGA SUME Acceptance Tests not working on Vivado 2016.4

[Ashish Kashinath]

Hi folks, we are facing issues while running acceptance tests on NetFPGA SUME board. We are following steps listed in:

https://github.com/NetFPGA/NetFPGA-SUME-public/wiki/Acceptance-Test-Project

The steps work fine till "make cores" - Next, when we run "make test", the "Run Auto Test" does not terminate.

We have attached screenshots from our tests here. Could you tell us if we are missing something? We just want to make sure that our board is not having any fault.

Any help in this regard is highly appreciated.

 

Regards,

pic1

[JColvin]

Hi @Ashish Kashinath,

I would recommend asking the NetFPGA Group directly via NetFPGA mailing list (link if you are not already signed up) which have more experience specifically running the acceptance tests, if only for the reason that they are the people who developed and maintain the acceptance tests.

Thank you,
JColvin