Glenn Posted September 12, 2019 Share Posted September 12, 2019 Hello, I have an MCC device that does not allow me to use the signal generator and analog inputs at the same time.This may be a SW issue that can be resolved with a $200 upgrade. Does the AD2 have the same limitation out of the box? Thanks, Glenn Link to comment Share on other sites More sharing options...
attila Posted September 12, 2019 Share Posted September 12, 2019 Hi @Glenn No. In AD2 there is nothing that unlock$. The AD2 has 16 DIOs + 2 trigger IOs, 2 differential scope inputs 5/50Vpk2pk, 2 AWG outputs 10Vpk2pk, all these at 100MHz/Msps, positive and negative supplies +/-1...+/-5V 700mA, 0.5 total with USB and 2.1W total limit with auxiliary supply. https://reference.digilentinc.com/analog_discovery_2:analog_discovery_2 Link to comment Share on other sites More sharing options...
Glenn Posted September 21, 2019 Author Share Posted September 21, 2019 Thanks! Link to comment Share on other sites More sharing options...
Question
Glenn
Hello,
I have an MCC device that does not allow me to use the signal generator and analog inputs at the same time.This may be a SW issue that can be resolved with a $200 upgrade.
Does the AD2 have the same limitation out of the box?
Thanks,
Glenn
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.