BASYS-3 BOM specs on FPGA Power and Power Schematics

[Gabriel Uribe Romero]

Hello,

I have been working for about a year using the BASYS-3 board for FPGA development on my company. Within the documentation of the BASYS-3 board, I know that schematic diagrams are available for user to download. I would like to know if there is a way to access parts that you selected for your decoupling capacitors network and for the power supplies circuits. Ideally, if you can provide a BOM for those two sheets of your schematics that would be great. I do not know if that is something that you are allow to share, but I still wanted to ask.

Thanks,

Gabriel.

[jpeyron]

Hi @Gabriel Uribe Romero,

Welcome to the Digilent Forums!

For discrete parts without part number see the following requirements:

All ceramic capacitors are temperature coefficient X5R, X7R or C0G, unless specified otherwise.
Capacitors without maximum voltage rating are 6.3V or greater.
Capacitors without tolerance specification are 10% (20% if 10% is unavailable) or better.
Resistors without power rating are 1/16W or greater.
Resistors without tolerance specification are 5% or better.

Let us know if you are looking for more specific information about a specific capacitor and we will see what we can do.

If that is the case, please detail the individual capacitors that you are interested in I.E. C112 or C106...

best regards,

Jon