eric_holtzclaw Posted April 22, 2019 Share Posted April 22, 2019 vivado_init.tcl: set_param board.repoPaths load_features core enable_beta_device* What's wrong with this picture? Thanks, >>Eric Link to comment Share on other sites More sharing options...
eric_holtzclaw Posted April 22, 2019 Author Share Posted April 22, 2019 set_param board.repoPaths This is the content of the first line. Vivado_init.tcl Link to comment Share on other sites More sharing options...
jpeyron Posted April 22, 2019 Share Posted April 22, 2019 Hi @eric_holtzclaw, Welcome to the Digilent Forums! In your Vivado_init.tcl I would first try deleting the < in front of the F: and have the full path to the board files. Next, I would erase the "# test" text and have an empty first line of the file. It may help to make put the board files on the same drive that Vivado is on. I have attached my working .tcl file. Some of the older versions of Vivado i have installed requires a different file name(init.tcl). best regards, Jon init.tcl Link to comment Share on other sites More sharing options...
eric_holtzclaw Posted April 22, 2019 Author Share Posted April 22, 2019 Thanks Jon - I was stuck and will give this a shot immediately! Reagards, >>Eric Link to comment Share on other sites More sharing options...
Question
eric_holtzclaw
vivado_init.tcl:
set_param board.repoPaths
load_features core
enable_beta_device*
What's wrong with this picture?
Thanks,
>>Eric
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.