learni07 Posted April 14, 2019 Share Posted April 14, 2019 Hi, I am trying to learn about Zynq APSoC using Zybo 7z020. I have successfully completed all steps of this tutorial :https://reference.digilentinc.com/vivado/getting-started-with-ipi/2018.2 I have a problem that Tera Term is always printing square brackets instead of the expected output as shown in this tutorial. I am using Vivado 2018.3 with SDK 2018.3 on Window 10. Below is the screen snapshot of the problem. Could anybody please help. Thank you very much Lrni Link to comment Share on other sites More sharing options...
BogdanVanca Posted April 15, 2019 Share Posted April 15, 2019 Hi @learni07, Can you please check the baud rate from Tera-Term? For this, click on Setup->Serial port and check Baud Rate down-menu. It has to be 115200. Best Regards, Bogdan Vanca Link to comment Share on other sites More sharing options...
learni07 Posted April 16, 2019 Author Share Posted April 16, 2019 Hi @BogdanVanca, Thanks, it was 9600 so changed it to 115200. I have to change it everytime I start TeraTerm. Is it possible to save the configurations? Best regards, Lrni Link to comment Share on other sites More sharing options...
BogdanVanca Posted April 16, 2019 Share Posted April 16, 2019 Hi @learni07, If you want to save a specific setup, you can use putty or termite. Best Regards, Bogdan Vanca Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.