On the Cora Z7 Basic IO Example. I get the proper files from GitHub, Vivado (2017.4) Starts and loads the project fine, Vivado will "Generate Bitstream" the project without error.
I can't get past the: "Open Hardware Manager -> Open Target"
The menu bar continues to say "No Hardware Target is Open" (in green) Even though the Hardware Window says: "localhost(0) connected."
So the "Program Device" stays greyed out.
I'm missing something very basic - any ideas?
Edit: I should mention that I can run a processor "Hello World" example from the SDK just fine, so the board appears to work.
Question
Lost_In_Space
On the Cora Z7 Basic IO Example. I get the proper files from GitHub, Vivado (2017.4) Starts and loads the project fine, Vivado will "Generate Bitstream" the project without error.
I can't get past the: "Open Hardware Manager -> Open Target"
The menu bar continues to say "No Hardware Target is Open" (in green) Even though the Hardware Window says: "localhost(0) connected."
So the "Program Device" stays greyed out.
I'm missing something very basic - any ideas?
Edit: I should mention that I can run a processor "Hello World" example from the SDK just fine, so the board appears to work.
Thanks for your time.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.