See the images and .dfw3work file. After saving and re-opening this workspace, the SinePower, Power, low limit and current value settings change from their prior values. (Less important is that the AWG window has re-sized, with the waveform wider and the settings narrower.) [Edit after original post: If it matters, this is using an Electronics Explorer board with AWG1 connected to the Scope channel 1 DC input.]
Question
Rick314
See the images and .dfw3work file. After saving and re-opening this workspace, the SinePower, Power, low limit and current value settings change from their prior values. (Less important is that the AWG window has re-sized, with the waveform wider and the settings narrower.) [Edit after original post: If it matters, this is using an Electronics Explorer board with AWG1 connected to the Scope channel 1 DC input.]
190410_SinePower.dwf3work
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.