Jump to content
  • 0

Petalinux on Zybo Z7-10


flying

Question

Hi,

After reading that PCAM 5C is supported in Zybo Z7-20 I was wondering if this is possible with Zybo Z7-10 ?


I saw the repository https://github.com/Digilent/Petalinux-Zybo-Z7-20 has some commits regarding PCAM 5C while https://github.com/Digilent/Petalinux-Zybo-Z7-10 is poorer.

Which device driver does Petalinux Z7-20 uses for opening and reading from camera ? is there some DPHY MIPI CSI/DSI IP in FPGA fabric or a software stack decoding MIPI signals?
How would be the approach to enable PCAM 5C streaming in Petalinux Zybo Z7-10?

Best regards

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

Hi @flying,

I believe you can implement it (or at least for the Pcam 5C demo, not necessarily the PetaLinux project, as per these two threads here and here). My understanding is that the Z7-10 simply didn't have enough space to also contain the debug portion of the CSI-2 IP core. Otherwise, I believe the Petalinux release uses V4L2 drivers to receive the Pcam inputs.

Let me know if you have any questions about this.

Thank you,
JColvin

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...