engvlad Posted March 5, 2019 Share Posted March 5, 2019 I plugged a USB cable from my Win10-x64 PC to my new BASYS3 "Micro-AB USB Connector(J4)" and than opened the "Device Manager" but don't see any new USB or anything else which was not there before, can you please help me to debug it. Link to comment Share on other sites More sharing options...
Cristian.Fatu Posted March 5, 2019 Share Posted March 5, 2019 Hello, Please check to have the POWER jumper (JP2) set to USB and the POWER switch (SW16) set to ON. Link to comment Share on other sites More sharing options...
engvlad Posted March 6, 2019 Author Share Posted March 6, 2019 Yes I done that already i.e. POWER jumper (JP2) set to USB and the POWER switch (SW16) set to ON. Link to comment Share on other sites More sharing options...
engvlad Posted March 6, 2019 Author Share Posted March 6, 2019 Sorry, I found the issue which is a bad USB cable, I try a different cable and now everything works, it only took me two weeks to debug it Link to comment Share on other sites More sharing options...
jpeyron Posted March 6, 2019 Share Posted March 6, 2019 Hi @engvlad, Glad to hear you are able to use the Basys 3 after changing out the USB cable. Here is the resource center for the Basys 3 if you havent seen it yet. cheers, Jon PS: Welcome to the Digilent forums! Link to comment Share on other sites More sharing options...
Question
engvlad
I plugged a USB cable from my Win10-x64 PC to my new BASYS3 "Micro-AB USB Connector(J4)" and than opened the "Device Manager" but don't see any new USB or anything else which was not there before, can you please help me to debug it.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.