I'm thinking about to get a AD2 for my project and I want to make sure, if everything will be working fine.
I want to achive a closed loop with the AD2. I want to set a PWM to control a motor though the Matlab Data Acquisition Toolbox and check simultaneously the pulse signals of the hall sensor with the ADC.
Is this possible? The ADC should work with 10Ms/s to get the data. The PWM will be around 20KHz Square/Sinus output.
Question
6o{pb
Hey there
I'm thinking about to get a AD2 for my project and I want to make sure, if everything will be working fine.
I want to achive a closed loop with the AD2. I want to set a PWM to control a motor though the Matlab Data Acquisition Toolbox and check simultaneously the pulse signals of the hall sensor with the ADC.
Is this possible? The ADC should work with 10Ms/s to get the data. The PWM will be around 20KHz Square/Sinus output.
Thanks in advance
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.