pmod wifi

[Gourav]

i have  start doing one project on video processing through zybo board and in that  i have to  take data from hdmi port and send through pmod wifi to another side having pmod wifi as receiver ,it will receive that data and show on projector.

 

but that data from axi-4 stream to video out i have to connect it to pmod wifi ,but i dont know how to connect,

is their anyway to  make their interface.

i have completed video stream part by watching zybo video workshop

and i have tested both pmod wifi as tcp server and tcp client.

 

but dont know to connect them both in video pipeline .i have attach that image below

 

pls provide some solution or any other guidence.how to proceed

[jpeyron]

Hi @Gourav,

Here is a forum thread that discusses taking data from the DVI2RGB IP and connecting it to the AXI bus to store the data in the DDR that might be helpful. If you can get the DVI2RGB data to be stored on the DDR then this point you should be able to access the DDR memory and send it through the server/client WIFI setup.

thank you,

Jon