Hi, I'm attempting to use the ISNS20 with an Arduino Uno. I am using a Sparkfun Bi-Directional Logic Level Converter to handle 5V vs 3.3V. I'm using the source from https://www.hackster.io/58702/using-the-pmod-isns20-with-arduino-uno-0ee8db . CS is connected to Pin 10, D0 is connected to Pin 12 and CLK is Pin 13. I wire Black/Line to IP+ and the IP- to the Black/Line connection on an outlet. Unfortunately I get the same result if I draw current or not (using a hair dryer).