atluft Posted February 27, 2019 Share Posted February 27, 2019 The schematic posted here https://reference.digilentinc.com/_media/reference/programmable-logic/arty-s7/arty_s7_sch-rev_e.pdf shows J9 as the JTAG header but the board I received has the JTAG header labeled J11. Please help me untangle this, my ultimate goal is I would like to attach the JTAG HS3 to validate the vivado tool is working correctly with the HS3. Using the USB connection to program the board works fine, I understand that is the desired operation. My goal is to verify my tools work for developing my own board. Thank you for your help, Aaron Link to comment Share on other sites More sharing options...
jpeyron Posted February 27, 2019 Share Posted February 27, 2019 Hi @atluft, J9 is labeled on the bottom of the Arty-S7 as shown on the screen shot below. J9 is shown on the top of page 6 of the schematic for rev E here. J11 is on the bottom of page 10 of the schematic. Please attach a picture of J11 and J9 if your Arty-S7 rev E is not labeled as shown below. cheers, Jon Link to comment Share on other sites More sharing options...
atluft Posted February 27, 2019 Author Share Posted February 27, 2019 thank you Link to comment Share on other sites More sharing options...
Question
atluft
The schematic posted here https://reference.digilentinc.com/_media/reference/programmable-logic/arty-s7/arty_s7_sch-rev_e.pdf shows J9 as the JTAG header but the board I received has the JTAG header labeled J11. Please help me untangle this, my ultimate goal is I would like to attach the JTAG HS3 to validate the vivado tool is working correctly with the HS3.
Using the USB connection to program the board works fine, I understand that is the desired operation. My goal is to verify my tools work for developing my own board.
Thank you for your help,
Aaron
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.