Recommended Posts

Hello, I have been following the OpenScope MZ tutorials and got stuck at the Instrument Panel video because I have been unable to successfully generate a sine wave using waveformslive. I was unable to generate the sine wave using the 'single' option on the panel, it remains stuck in the armed status. The only signal that I have been able to generate (pictured below) is too noisy and had to use the force option on the panel. I've re-calibrated several times, tried it on different internet browsers, and have tried running the device using the network and USB option. 

Thank you, 

Arlene

 

{107DCD9E-83D4-4BEB-8EDB-392ADE2F7380}.png.jpg

Share this post


Link to post
Share on other sites

Hi @arlene703,

Could you attach a picture of your physical setup? The only thing I was able to find that closely replicated your setup was that the WaveForm generator (yellow wire) was connected to Oscilloscope channel 2 (the blue wire) rather than Oscilloscope channel 1 (orange wire).

Let me know if you have any more questions.

Thanks,
JColvin

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this