Jump to content
  • 0

Waveforms 3.8.22 UART Protocol/Logic bug + suggestions


Piotr Rzeszut

Question

Hi,

Windows 7x64

Waveforms 3.8.22 (beta)

Analog Discovery 2 / Digital Discovery

Issue: inverting polarity in Protocol has no transfer to Logic analyzer window

Steps to reproduce:

  1. Run Protocol
  2. Select UART Polarity: Inverted
  3. Click Logic Analyzer 
  4. In Logic UART is set to be decoded with Standard polarity

Suggestion: UART data should be also available with HEX formatting or other non-ASCII formats. Also an option to break line after N chars received would be nice

Kind Regards

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

@attila

As always: Thank you very much ;)

Another suggestion: In scope we do have Average and Oversampling options. None is followed by maximum value, then decreasing to reach 1 (which is equivalent to none). Ex. for Oversampling, we have options arranged like this: None, 16, 8, 4, 2, 1

In my opinion better order would be to place None value next to minimal (and maybe replacing value of 1 by "1 (none)", so it will be:

16, 8, 4, 2, 1, None or 16, 8, 4, 2, 1 (none).

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...