160276F Posted February 1, 2019 Share Posted February 1, 2019 Any solution? Link to comment Share on other sites More sharing options...
zygot Posted February 1, 2019 Share Posted February 1, 2019 The first step would be to find out if the Atlys USB interface was enumerated by your OS when the cable was plugged in or the board turned on. If it was then was it enumerated correctly? Windows device Manager might help in this regard. Link to comment Share on other sites More sharing options...
jpeyron Posted February 1, 2019 Share Posted February 1, 2019 Hi @160276F, My understanding is that in Adept 2 if the programming circuit for the Atlys isn't powered correctly you will receive all F's as an ID. 1) I would try using a different USB cable and usb port. 2) Different PC 3) What does the device manager show in Ports and Universal Serial Bus Controller when the Atlys is connected and turned on. thank you, Jon Link to comment Share on other sites More sharing options...
Question
160276F
Any solution?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.