Dennis E. Bahr, PHD Posted January 23, 2019 Share Posted January 23, 2019 What are the three connections on the 100 pin connector on the Nexys 2 board? FX2-CLKIN, FX2-CLKOUT, FX2-CLKIO Link to comment Share on other sites More sharing options...
jpeyron Posted January 23, 2019 Share Posted January 23, 2019 Hi @Dennis E. Bahr, PHD, Based on the naming convention Digilent uses and page 4 of the reference manual for the FX2 Bread Board here i would say these pins are meant to be clock inputs and outputs through the FX2 connector. In Table 1. FX2 signals and connector pinout is show that the CLKOUT is a clock from the host to peripheral, CLKIN is a clock from peripheral to host, and the CLKIO is a clock from host to peripheral. thank you, Jon Link to comment Share on other sites More sharing options...
Question
Dennis E. Bahr, PHD
What are the three connections on the 100 pin connector on the Nexys 2 board? FX2-CLKIN, FX2-CLKOUT, FX2-CLKIO
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.