I have the same problem as here but with a JTAG-HS3 :
Very hot at the bottom right near the "A".
It is recognized in Vivado and Adept (SN:210299A568D8) but not my FPGA and Flash
It's a custom card that's been working for several months.
I tested with 2 cards and it's the same.
Vivado error :
Quote
[Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210299A568D8.
Check cable connectivity and that the target board is powered up then
use the disconnect_hw_server and connect_hw_server to re-register this hardware target.
Question
StéphaneC
Hi,
I have the same problem as here but with a JTAG-HS3 :
Very hot at the bottom right near the "A".
It is recognized in Vivado and Adept (SN:210299A568D8) but not my FPGA and Flash
It's a custom card that's been working for several months.
I tested with 2 cards and it's the same.
Vivado error :
Is my HS3 dead?
Thanks,
Stéphane
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.