Lucas Fraga Posted November 13, 2018 Share Posted November 13, 2018 I need to confirm that the NetFPGA-SUME Virtex-7 FPGA Development Board comes with the features below as stated on Digilent website: Xilinx Virtex-7 XC7V690T FFG1761-3 Xilinx CPLD XC2C512 for FPGA configuration PCIe Gen3 x8 (8Gbps/lane) Two 512Mbits Micron StrataFlash (PC28F512G18A) Programming: Xilinx Vivado® Design Suite Three x36 72Mbits QDR II SRAM (CY7C25652KV18-500BZC) Two 4GB DDR3 SODIMM (MT8KTF51264Hz-1G9E1) Micro USB Connector for JTAG programming and debugging (shared with UART interface) One Micro USB cable for programming/UART QTH Connector (8 RocketIO GTH transceivers) Four SFP+ interface (4 RocketIO GTH transceivers) supporting 10Gbps Two SATA-III ports User LEDs and Push Buttons One HPC FMC Connector (10 RocketIO GTH transceivers) One Pmod port Link to comment Share on other sites More sharing options...
JColvin Posted November 13, 2018 Share Posted November 13, 2018 Hi @Lucas Fraga, I can confirm that the features we listed on our store page for the NetFPGA SUME are accurate. For additional details, I would recommend watching the introduction video on the same store page, the Reference Manual on our Wiki, and NetFPGA wiki that the NetFPGA Group maintains. Thanks, JColvin Link to comment Share on other sites More sharing options...
Lucas Fraga Posted November 13, 2018 Author Share Posted November 13, 2018 Thanks JColvin can you please let me know the lead time for 3 units, please? Link to comment Share on other sites More sharing options...
JColvin Posted November 13, 2018 Share Posted November 13, 2018 Hi @Lucas Fraga, Unfortunately, I do not know that answer. You would need to contact our sales team, sales @ digilentinc (dot) com, to get accurate lead times and other similar details. Thanks, JColvin Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.