Chakma Posted August 31, 2018 Share Posted August 31, 2018 Hi there, I have been trying to run the demo Pcam 5C on Zybo Z7-10 which was originally designed for Zybo Z7-20 board. But as both the boards pin mapping are same, so that's compatible. But yet with no luck. Here are the steps i have done : 1. Create the project by create_project.tcl file on 2016.4 vivado. 2. Change the device to Zybo Z7-10. 3. Run upto bitstream generation. 4. Export the hardware with bitstream to sdk and lauch sdk. 5. On sdk File->Import->Existing Projects into Workspace-> include the demo sdk projects and build the projects. 6. Then program the fpga as in Program.jpg in attach file. 7. Run as in run.jpg in attach file. 8. got the error as in error.jpg. Note: I am attaching the sdk log also. Please help me out!! sdk log.txt Link to comment Share on other sites More sharing options...
jpeyron Posted August 31, 2018 Share Posted August 31, 2018 Hi @Chakma, Along with @BogdanVanca's steps could you make sure that the Zybo-Z7-10's mode jumper (JP5) is set to JTAG. thank you, Jon Link to comment Share on other sites More sharing options...
BogdanVanca Posted August 31, 2018 Share Posted August 31, 2018 Hello @Chakma, Please go trough this five steps, and after that tell me if your problem still persists: 1. Unplug the Usb cable 2. Go to Task Manager and end task the hw_server.exe 3. Plug it again 4.Program FPGA 5. Run application Thank you. Best Regards, Bogdan Vanca Link to comment Share on other sites More sharing options...
Chakma Posted September 2, 2018 Author Share Posted September 2, 2018 Thanks! @jpeyron @BogdanVanca Finally got the pic from cam! Thanks a lot! Link to comment Share on other sites More sharing options...
jpeyron Posted September 4, 2018 Share Posted September 4, 2018 Hi @Chakma, Glad to hear you are able to get a picture. thank you, Jon Link to comment Share on other sites More sharing options...
ahmedengr.bilal Posted May 10, 2019 Share Posted May 10, 2019 @Chakma hi .. i have zybo z7-10 board.. but i could find a way to run pcam demo in it.. i am new to this so if you can send me your project so that i can run on zybo-z7 10 board Link to comment Share on other sites More sharing options...
jpeyron Posted May 10, 2019 Share Posted May 10, 2019 Hi @ahmedengr.bilal, We responded to your other thread here. best regards, Jon Link to comment Share on other sites More sharing options...
Question
Chakma
Hi there,
I have been trying to run the demo Pcam 5C on Zybo Z7-10 which was originally designed for Zybo Z7-20 board. But as
both the boards pin mapping are same, so that's compatible. But yet with no luck.
Here are the steps i have done :
1. Create the project by create_project.tcl file on 2016.4 vivado.
2. Change the device to Zybo Z7-10.
3. Run upto bitstream generation.
4. Export the hardware with bitstream to sdk and lauch sdk.
5. On sdk File->Import->Existing Projects into Workspace-> include the demo sdk projects and build the projects.
6. Then program the fpga as in Program.jpg in attach file.
7. Run as in run.jpg in attach file.
8. got the error as in error.jpg.
Note: I am attaching the sdk log also.
Please help me out!!
sdk log.txt
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.