I'm using the Picozed carrier card (v2) and I discovered that the pinout listed in the user guide is not correct. I'm looking at PicoZed™ FMC Carrier Card V2 Hardware User Guide section 2.8, the last column on the right.
Using a multi-meter, I confirmed that pins 9 and 10 are ground while pins 11 and 12 are +3.3V. I don't have any easy way to verify which PMOD pins go to which JX pins. I'm hoping I just slide pins 7,8,9,10 up by two pins, but I don't like making assumptions with things like this. Does anyone know the correct pin mapping?
Question
Kyle Gregory
I'm using the Picozed carrier card (v2) and I discovered that the pinout listed in the user guide is not correct. I'm looking at PicoZed™ FMC Carrier Card V2 Hardware User Guide section 2.8, the last column on the right.
Using a multi-meter, I confirmed that pins 9 and 10 are ground while pins 11 and 12 are +3.3V. I don't have any easy way to verify which PMOD pins go to which JX pins. I'm hoping I just slide pins 7,8,9,10 up by two pins, but I don't like making assumptions with things like this. Does anyone know the correct pin mapping?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.