Sensor selection for PMOD AD5 card

[Hariprasad Bhat]

Hi,

We are using  Pmod AD5 with Custom Zynq 7000 platform. We are planning to use following sensors to interface with the add-on card

https://reference.digilentinc.com/reference/pmod/pmodad5/start

a.       Luminance

b.       Temperature

c.       Voltage/Current

Please suggest the compatible sensors for AD5 card.

 

With Regards,

HPB

[JColvin]

Hi @Hariprasad Bhat,

We don't have any specific sensors that we recommend directly for the Pmod AD5. The main thing that you want to do is to keep the voltage range supplied to the Pmod AD5 is within the voltage range set on Pmod (2.5V +/- 19.53 mV by default), though this can be expanded to -3.75V to +3.75 as per the device datasheet.

Digilent does have a few Pmods that do the things your are looking for though:

Luminance -- Pmod ALS, Pmod LS1
Temperature -- Pmod TMP2, Pmod TMP3, Pmod TC1
Voltage/Current -- Pmod PMON1, Pmod ISNS20

Let me know if you have any questions.

Thanks,
JColvin

[Hariprasad Bhat]

Hi @JColvin

Thank you very much for suggesting the modules. Indeed very helpful.

 

With Regards,

HPB