We have custom designed control board for our business needs which uses Atrix-7 FPGA. The control board design contain FTDI chip along with 93AA56BT EEPROM chip. we want to use this setup to access JTAG and flash/debug FPGA through viviado.
We used Arty boards for initial FPGA development.
The question is how can we make our custom board FTDI chip working the same as Arty boards.
Do we need licensed EEPROM contents if so then how can we get it and how to program it.
Question
Ameraj
Hi,
We have custom designed control board for our business needs which uses Atrix-7 FPGA. The control board design contain FTDI chip along with 93AA56BT EEPROM chip. we want to use this setup to access JTAG and flash/debug FPGA through viviado.
We used Arty boards for initial FPGA development.
The question is how can we make our custom board FTDI chip working the same as Arty boards.
Do we need licensed EEPROM contents if so then how can we get it and how to program it.
Any help would be appreciated.
Regards,
Ali
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.