PMOD TC1 works with WF32 using Adapter Shield but I get some quantization noise, is this native to device , I use this with a labview driver? These flat bands happen at 0.25 C increments.
I take about 1000 measuremtns , trim the lowest and highest 25%, then average the rest to one data point and then record this. Same math is performed on LMT86 (red), which is running on AI0 on the WF32.
Wondering if it fundemental to the PMod TC1, otherwise its in labview driver.
Question
Marty
PMOD TC1 works with WF32 using Adapter Shield but I get some quantization noise, is this native to device , I use this with a labview driver? These flat bands happen at 0.25 C increments.
I take about 1000 measuremtns , trim the lowest and highest 25%, then average the rest to one data point and then record this. Same math is performed on LMT86 (red), which is running on AI0 on the WF32.
Wondering if it fundemental to the PMod TC1, otherwise its in labview driver.
Thanks,
Marty
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.