sheriw Posted November 20, 2014 Share Posted November 20, 2014 Is the Analog Shield compatible with the Arduino Mega? Link to comment Share on other sites More sharing options...
JColvin Posted November 21, 2014 Share Posted November 21, 2014 Strictly speaking and for practical purposes, it is not compatible with the Arduino Mega. It was designed for the Arduino Uno and the chipKIT Uno32, so while the shield would be able to physically connect to the Mega, signals that the IC's present on the Analog Shield are expecting to receive are mapped to different pins than what the shield would actually connect to. Let me know if you have any more questions. JColvin Link to comment Share on other sites More sharing options...
wbeuttell Posted January 15, 2015 Share Posted January 15, 2015 What is the current sourcing capabilities of the analog shield? Is the AFS 5V or 7.5 or both? Link to comment Share on other sites More sharing options...
Diagonal Posted June 14, 2015 Share Posted June 14, 2015 Strictly speaking and for practical purposes, it is not compatible with the Arduino Mega. It was designed for the Arduino Uno and the chipKIT Uno32, so while the shield would be able to physically connect to the Mega, signals that the IC's present on the Analog Shield are expecting to receive are mapped to different pins than what the shield would actually connect to. I tried using a Mega2560. I confirm that it does not work with my simple ramp program I modified from an example. That program works with the Uno. I had been looking forward to having more memory. Thanks. Link to comment Share on other sites More sharing options...
Question
sheriw
Is the Analog Shield compatible with the Arduino Mega?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.