Emil Zacharia George Posted October 26, 2015 Share Posted October 26, 2015 I wanted to know whether something is to be done when using 6-pin JTAG Header (J12) instead of Micro-AB USBConnector (J11) in ZYBO™ FPGA Board? Link to comment Share on other sites More sharing options...
JColvin Posted October 26, 2015 Share Posted October 26, 2015 Hi Emil, From my understanding, as long as you have the JP5 jumper in the JTAG position as pictured here in the reference manual, there should not be anything else that you need to do hardware-wise, since the USB-UART portion of the board has been designed to "play nicely" with the JTAG circuitry (explained more here in the reference manual). Let me know if you have any more questions. Thanks,JColvin Link to comment Share on other sites More sharing options...
Emil Zacharia George Posted October 28, 2015 Author Share Posted October 28, 2015 Thank you Link to comment Share on other sites More sharing options...
Question
Emil Zacharia George
I wanted to know whether something is to be done when using 6-pin JTAG Header (J12) instead of Micro-AB USB
Connector (J11) in ZYBO™ FPGA Board?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.