I even downgraded to Vivado 2015.1, but I still get critical errors from the XDC file.
The part is correctly defined as an xc7a35tcpg236-1
[Vivado 12-1411] Cannot set LOC property of ports, Site location is not valid [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:15] Resolution: Verify the location constraints for differential ports are correctly specified in your constraints. The Site type should be of form: IO_LxxP for P-side, and IO_LxxN for N-side (Neg Diff Pair)
[Common 17-69] Command failed: 'C11' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:16]
[Common 17-69] Command failed: 'C10' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:17]
[Vivado 12-1411] Cannot set LOC property of ports, Site location is not valid [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:18] Resolution: Verify the location constraints for differential ports are correctly specified in your constraints. The Site type should be of form: IO_LxxP for P-side, and IO_LxxN for N-side (Neg Diff Pair)
[Common 17-69] Command failed: 'H5' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:23]
[Common 17-69] Command failed: 'J5' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:24]
[Common 17-69] Command failed: 'T9' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:25]
[Common 17-69] Command failed: 'T10' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:26]
[Common 17-69] Command failed: 'D9' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:31]
[Common 17-69] Command failed: 'C9' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:32]
[Common 17-69] Command failed: 'B9' is not a valid site or package pin name. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:33]
[Vivado 12-1815] Setting property 'IOSTANDARD' is not allowed for GT terminals. [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:34]
Question
mlewis1973
I can't get the example in the Arty Programming Guide to work
https://reference.digilentinc.com/arty:pg
I even downgraded to Vivado 2015.1, but I still get critical errors from the XDC file.
The part is correctly defined as an xc7a35tcpg236-1
[Vivado 12-1411] Cannot set LOC property of ports, Site location is not valid [C:/Users/mlewis/Xilinx/Arty/project_1/project_1.srcs/constrs_1/imports/arty_master/Arty_sw_btn_Demo.xdc:15] Resolution: Verify the location constraints for differential ports are correctly specified in your constraints. The Site type should be of form: IO_LxxP for P-side, and IO_LxxN for N-side (Neg Diff Pair)
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.