Search the Community
Showing results for tags 'prototyping'.
Found 3 results
-
Hello, Does PmodSD (https://reference.digilentinc.com/reference/pmod/pmodsd/reference-manual) support SD mode of operation? Is it designed only to work with SPI mode as written in the reference manual? Please let me know Regards, Vinay Shenoy
-
Turn your Nexys Video board into something useful for hardware development by adding the IO capabilities of another FPGA board. In this project the other board is a Digilent Spartan 3A Starter board. But it has a lot of resources that make it useful for a variety of projects needing an FPGA. The "magic" is supplied by those wonderful Ethernet PHY modems. Release 3 offers two target boards, Gigabit and 100 Mbps designs. Check it out even if all you want to do is connect any two FPGA boards with Ethernet capability. IO_EXPANDER_R3.zip
-
Hello. I recently bought a Digilent Arty FPGA dev board. I need to connect some 8-bit or 16-bit SRAM chips to the board and I have to determine what the best method would be, to bring out the ( 40, I believe ) data lines on the four 6x2-pin Pmod connectors on the side of the Arty and connect them to a solderless breadboard, preferably without any soldering involved in this process at all. I need access to the Arty's LEDs and buttons on the top so I don't really want to go with a stackable Arduino shield, which requires much soldering to attach a solderless breadboard, at least, soldering
