Search the Community
Showing results for tags 'kc705'.
Found 2 results
I'm trying to communicate with a Digilent JTAG-SMT1 on an older Xilinx KC705 from a Raspberry Pi 3 and I've successfully been able to communicate with it via cmd line. Now I want to convert the 2-wire demo to a 4-wire demo since the SMT1 can only support 4-Wire JTAG. The only problem is that I've had a hard time understanding what the difference between the two is. I just need a push in the right direction since I've gone through the API trying to understand it and I've made very little progress. Thank you for your time.
Hi all, We are a small startup looking for an pga development platform. We need a fast ADC/DAC FMC board and right now we're looking at the fmc163 from abaco https://www.abaco.com/products/fmc163-fpga-mezzanine-card. The board needs an FMC connector that conforms to the ANSI/VITA57.1 standard. I called Abaco and they confirmed it works with the Xilix KC705 kit https://www.xilinx.com/products/boards-and-kits/ek-k7-kc705-g.html via this adapter https://dedicatedsystems.com.au/products/fmc700/ but couldn't confirm compatibility with the genesys2 board directly. I couldn't find any information as to if the genesys2 actually supports high speed ADC boards through the vita57.1 connector or not. Given that both boards seem to use the exact same FPGA (XC7K325T-2FFG900C) It is very important for me to know if it will work. Thank you.