Search the Community
Showing results for tags 'ip core'.
Found 3 results
Hi all, I'm working on a video streming project with a zedboard and an ov7670 camera module. I found a similar project online, made by Mike Field, and I was able to make it work. But I want to buid the project using custom IP's. and I found this project: https://lauri.xn--vsandi-pxa.com/hdl/zynq/zybo-ov7670-to-vga.html I used the same (working) VHDL code, the same XDC file, the same setup, and followed his instructions, but for some reason, whenever I try to create custom IP's (with or without AXI), I can't make it work, and the monitor says "no signal". Can anyone please help to figure out what I'm doing wrong here? Thanks, Shlomi.
Hi all, I m a beginner in FPGA(zync 7000). I want to implement a project which took images from two cameras, one with usb(uvc) interface and one with csi-2 interface. One thing to note that i not using both cameras simultaneously. Only once at a time(Switch over whenever required) With first USB camera, i want to do some image proseesing functions like filtering and CLAHE(Contrast-limited adaptive histogram equalization) on the captured image. Then the processed is images is displayed on a HDMI or RGB interface mini projector(DLP 2000). Here i indicated both HDMI and RGB interface because of i need to test the performance of both interfaces with HDMI input projector and RGB input interface TI DLP 2000 mini projector. And I also need to display the image which is captured from the second CSI-2 camera and do a little enhancements, then display it in a DSI 5 inch LCD screen(51 pin MIPI DSI) the details link of cameras , projectors and lcd is given below USB Camera: http://www.elpcctv.com/mi5100-5mp-usb-camera-module-usb20-aptina-125inch-color-cmos-sensor-100degree-lens-p-221.html CSI-2 Camera: https://www.waveshare.com/product/rpi-camera-f.htm DLP 2000 RGB - projector: http://www.ti.com/tool/DLPDLCR2000EVM HDMI projector: https://www.ebay.in/itm/302673956725?aff_source=Sok-Goog Display : https://www.alibaba.com/product-detail/5-inch-720p-oled-display-720_1925219941.html?spm=a2700.7724838.2017115.42.6ba11d77AqfGq7 Can anyone please help me to build this project. Just give some basic idea like 1. which zynq version is suitable for this application? 2. Board design, start from scratch zynq design or any SOM modules having zynq 7000 3. Hard core or soft core ip? 4. best evaluation board for this design? I also need suggestions for above said questions. I want to do this in an industrial design way, so that i m asking help from others and I m just a beginner in this field, expecting good support from this forum. Great thanks in advance....................