Search the Community
Showing results for tags 'cerebot'.
I have one of the older Cerebot boards which should be equivalent to the Diglent Pro MX7 Embedded Systems Trainer Board that is currently for sale. I would like to capture CAN traffic using an Analog Discovery module and Waveforms software. I have two basic questions. After studying related posts on this forum, I get the strong sense that Analog Discovery and Waveforms software are better suited for connecting to the "PIC side" of the transceivers (RX and TX), rather than CAN side, where CANH and CANL are differential signals. (1) Is this correct? After studying the Cerebot sche
Hello all, I have the MX4CK pic32 cerebot board, and am trying to implement the pmod wifi. I have attempted to use several of the available examples from Microchip, to no avail, and haven't come across anybody who has successfully implemented the pmod wifi. Can anyone help out with some starter c code for MPLAB? I would like to implement it as ad-hoc / point to point wifi to communicate with my linux box over TCP (or any other layer), but something router-based would be fine, if I can get my hands on a router. Apologies if it sounds like a plea of laziness. I have been toying with trying to ge
Good day, I am looking into implementing a design, using MPLAB X IDE, capable of driving the Servo Motors on a Cerebot 32MX4 PIC using the S1,S2,S3 pins found on the board. I am currently using the RDK Basic reference design as a base for my own design that will be capable of both driving the motors and using the servo motors attached. Since this board is on its last legs and has been replaced by the new Chipkit board it is quite a bit harder to find proper documentation on the servo side of things. I have found references to a design called Cerebot32MX4_Servo_rd.zip and determined that t
Good day community, I'm busy working on a project with a Cerebot MX7 Pro. It's me now noticed that the board so every 5 to 10 minutes restarts. This is not intended by me. I would be happy to send you my project to be ruled by an error on the board. I am using MPLAB X 3.15 with the XC32 1.40 on the PowerDebug USB connection. I hope for an insightful answer or input. Test02.zip