Search the Community
Showing results for tags 'a7-100'.
Found 3 results
I had left my board connected to my laptop and power to the board was abruptly cut off when the laptop died. I tried to connect the board to a different computer and realized that it no longer turned on. Though, the computer's device manager shows that something is plugged in. Yet, adept and vivado are unable to recognize that a device is connected - on vivado I was planning to restore the board to it's default setting using a .bin file but received the following error message: ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210292AA77E6A. Check cable connectivity and that the target board is powered up then use the disconnect_hw_server and connect_hw_server to re-register this hardware target. ERROR: [Common 17-39] 'open_hw_target' failed due to earlier err. I used a voltmeter to test the voltage across the on/off switch and was getting around 3.3V but now get 0.003V. When I tested the switches that control the on-board LEDS, the also produced around 0.003V. Please help.
Hello, I am working through some of the examples for the Arty A7 device. The device seems to come pre-loaded with firmware, some simple reference design that makes use of UART, LED's and pushbuttons. Is there some project I can download to reproduce this reference design? I am planning to overwrite this in the future, but I also wanted to have a copy. Thanks
I am finally getting my arty running and have written or modified existing VHDL code and configured it to the FPGA with great success. I am wondering if there are references upon connecting to the arduino usb host shield. I am also wondering how soon the arty A7-100 will be available. Sincerely, DC