sepack

Members
  • Content Count

    2
  • Joined

  • Last visited

  1. I have connected an ov 7670 camera to my Basys 3 board and want to transmit the frame to a PC via the micro-usb port. I have tried UART serial communication, but the bit per second rate is simply not high enough to transmit a full 640 * 480 frame 15/30 times a second. I had the idea of implementing some sort of parallel communication, however I could not find any information or guides. I was wondering if anyone could help me out either with parallel communication, or suggesting a different method of transmitting frames to a PC. Thanks in advance.
  2. Hi everyone, I am trying to connect an OV 7670 camera to my basys 3 board and program it so that it shows the live camera feed on a monitor connected to the VGA port of the basys 3. The only thing I was able to do is connect the camera to the pins on the basys 3. I've looked everywhere, including here, but cannot write the other components, like frame buffer, myself. I would appreciate any help or any suggestions about where to look for help. P.S. I have enough knowledge of VHDL and the basys 3 board to implement an adder that uses the 7-segment display. Thanks.