bass2

Members
  • Content Count

    4
  • Joined

  • Last visited

  1. Yes, it's a 7020. I was able to get things working by power cycling the device. I was under the impression that changing jumper positions for boot device (JTAG vs. SPI) was enough to do between flashing the FPGA. I found that power cycling the device with the jumper in the JTAG position, and then flashing the device fixed this issue.
  2. Hi @jpeyron, Thanks for the info. I'll check out the posts and see where it leads. I'm using the Digilent board files from GitHub, and I'm selected the board when I create a new project. I've configured the zynq processor manually and using block automation with the same result.
  3. Getting the following error when trying to launch application on hardware through SDK after programming the FPGA. Tried multiple applications/hardware configurations. Error while launching program:no targets found with "name =~"APU*" && jtag_cable_name =~ "Digilent Zybo Z7 210351A825F9A"". available targets:1 DAP (JTAG port open error. AP transaction error, DAP status 30000021)2* xc7z020
  4. I'm on a Linux machine and don't have access to windows to use the GUI application. I able create the PROM file from the bitstream using iMPACT, but I haven't been able to find documentation that indicates what PROM is attached to the FPGA. ISE 14.7 with iMPACT Board: Nexsys3 Family: Spartan6 Device: XC6SLX16 Package CSG324