• Content Count

  • Joined

  • Last visited

  1. Thanks for pointing this out ... this is very strange since I had originally ordered a zybo z7010 from digikey. I'll sort it out with them.
  2. Yes. This is the block diagram. https://drive.google.com/drive/folders/13iwrcli1m1Ipwd8PyxIJRnk0Gp7e5gw7?usp=sharing
  3. Thanks for your reply. Yes, i can confirm that the board file was selected correctly (downloaded from Digilent github) as shown below. Here's the block diagram: I've also noticed that the system clock isn't connected to anything. Is this expected?
  4. Hi, I've recently bought a Zybo z7010 board and had a go at running the example given here: https://reference.digilentinc.com/learn/programmable-logic/tutorials/zybo-getting-started-with-zynq/start#tutorial The bitstream was generated successfully as expected but when I load the application on to the Zynq PS, I observe that: None of the LEDs are lit when the corresponding buttons are flicked. No message is displayed on the UART console when any of the switches are pressed. Can anyone provide some hints on how would I go about debugging the issue? Some info w.r.t