yorees11

Members
  • Content Count

    6
  • Joined

  • Last visited

About yorees11

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi @jpeyron, That is indeed the Tera Term output when I launched the above code on the hardware. Something weird is happening. When I place a "Hello World" as the first line in main the line does not print to the screen; however, if I place it in the while loop where it waiting for the interrupt it will continually print it. Regards, Rees
  2. Hi @jpeyron, For that program this is the output and code is stuck in the while loop. Thanks for looking into this for me. Regards, Rees
  3. Hi all, I have been working with the CMOD A7 board using vivado 2018 and sdk. I have been trying to get the microblaze soft core to respond to the interrupts generated by the peripherals. I started with the timer but have since moved simpler to the uart. I have connected my hardware as shown here. And the code that I am testing is an imported example from drivers board support package. Specifically, it is the one from the uartlite and it is the interrupt exapmle. /****************************************************************************** * * Copyright (C) 2002 - 2015 Xilinx, Inc. All rights reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * Use of the Software is limited solely to applications: * (a) running on a Xilinx device, or * (b) that interact with a Xilinx device through a bus or interconnect. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Except as contained in this notice, the name of the Xilinx shall not be used * in advertising or otherwise to promote the sale, use or other dealings in * this Software without prior written authorization from Xilinx. * ******************************************************************************/ /******************************************************************************/ /** * * @file xuartlite_intr_example.c * * This file contains a design example using the UartLite driver (XUartLite) and * hardware device using the interrupt mode. * * @note * * The user must provide a physical loopback such that data which is * transmitted will be received. * * MODIFICATION HISTORY: * <pre> * Ver Who Date Changes * ----- ---- -------- ----------------------------------------------- * 1.00a jhl 02/13/02 First release * 1.00b rpm 10/01/03 Made XIntc declaration global * 1.00b sv 06/09/05 Minor changes to comply to Doxygen and coding guidelines * 2.00a ktn 10/20/09 Updated to use HAL Processor APIs and minor changes * for coding guidelnes. * 3.2 ms 01/23/17 Added xil_printf statement in main function to * ensure that "Successfully ran" and "Failed" strings * are available in all examples. This is a fix for * CR-965028. * </pre> ******************************************************************************/ /***************************** Include Files *********************************/ #include "xparameters.h" #include "xuartlite.h" #include "xintc.h" #include "xil_exception.h" #include "xil_printf.h" /************************** Constant Definitions *****************************/ /* * The following constants map to the XPAR parameters created in the * xparameters.h file. They are defined here such that a user can easily * change all the needed parameters in one place. */ #define UARTLITE_DEVICE_ID XPAR_UARTLITE_0_DEVICE_ID #define INTC_DEVICE_ID XPAR_INTC_0_DEVICE_ID #define UARTLITE_INT_IRQ_ID XPAR_INTC_0_UARTLITE_0_VEC_ID /* * The following constant controls the length of the buffers to be sent * and received with the UartLite device. */ #define TEST_BUFFER_SIZE 100 /**************************** Type Definitions *******************************/ /***************** Macros (Inline Functions) Definitions *********************/ /************************** Function Prototypes ******************************/ int UartLiteIntrExample(u16 DeviceId); int SetupInterruptSystem(XUartLite *UartLitePtr); void SendHandler(void *CallBackRef, unsigned int EventData); void RecvHandler(void *CallBackRef, unsigned int EventData); /************************** Variable Definitions *****************************/ XUartLite UartLite; /* The instance of the UartLite Device */ XIntc InterruptController; /* The instance of the Interrupt Controller */ /* * The following variables are shared between non-interrupt processing and * interrupt processing such that they must be global. */ /* * The following buffers are used in this example to send and receive data * with the UartLite. */ u8 SendBuffer[TEST_BUFFER_SIZE]; u8 ReceiveBuffer[TEST_BUFFER_SIZE]; /* * The following counters are used to determine when the entire buffer has * been sent and received. */ static volatile int TotalReceivedCount; static volatile int TotalSentCount; /******************************************************************************/ /** * * Main function to call the UartLite interrupt example. * * @param None * * @return XST_SUCCESS if successful, XST_FAILURE if unsuccessful * * @note None * *******************************************************************************/ int main(void) { int Status; /* * Run the UartLite Interrupt example, specify the Device ID that is * generated in xparameters.h. */ Status = UartLiteIntrExample(UARTLITE_DEVICE_ID); if (Status != XST_SUCCESS) { xil_printf("Uartlite interrupt Example Failed\r\n"); return XST_FAILURE; } xil_printf("Successfully ran Uartlite interrupt Example\r\n"); return XST_SUCCESS; } /****************************************************************************/ /** * * This function does a minimal test on the UartLite device and driver as a * design example. The purpose of this function is to illustrate * how to use the XUartLite component. * * This function sends data and expects to receive the same data through the * UartLite. The user must provide a physical loopback such that data which is * transmitted will be received. * * This function uses interrupt driver mode of the UartLite device. The calls * to the UartLite driver in the handlers should only use the non-blocking * calls. * * @param DeviceId is the Device ID of the UartLite Device and is the * XPAR_<uartlite_instance>_DEVICE_ID value from xparameters.h. * * @return XST_SUCCESS if successful, otherwise XST_FAILURE. * * @note * * This function contains an infinite loop such that if interrupts are not * working it may never return. * ****************************************************************************/ int UartLiteIntrExample(u16 DeviceId) { int Status; int Index; /* * Initialize the UartLite driver so that it's ready to use. */ Status = XUartLite_Initialize(&UartLite, DeviceId); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Perform a self-test to ensure that the hardware was built correctly. */ Status = XUartLite_SelfTest(&UartLite); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Connect the UartLite to the interrupt subsystem such that interrupts can * occur. This function is application specific. */ Status = SetupInterruptSystem(&UartLite); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Setup the handlers for the UartLite that will be called from the * interrupt context when data has been sent and received, specify a * pointer to the UartLite driver instance as the callback reference so * that the handlers are able to access the instance data. */ XUartLite_SetSendHandler(&UartLite, SendHandler, &UartLite); XUartLite_SetRecvHandler(&UartLite, RecvHandler, &UartLite); /* * Enable the interrupt of the UartLite so that interrupts will occur. */ XUartLite_EnableInterrupt(&UartLite); /* * Initialize the send buffer bytes with a pattern to send and the * the receive buffer bytes to zero to allow the receive data to be * verified. */ for (Index = 0; Index < TEST_BUFFER_SIZE; Index++) { SendBuffer[Index] = Index; ReceiveBuffer[Index] = 0; } /* * Start receiving data before sending it since there is a loopback. */ XUartLite_Recv(&UartLite, ReceiveBuffer, TEST_BUFFER_SIZE); /* * Send the buffer using the UartLite. */ XUartLite_Send(&UartLite, SendBuffer, TEST_BUFFER_SIZE); /* * Wait for the entire buffer to be received, letting the interrupt * processing work in the background, this function may get locked * up in this loop if the interrupts are not working correctly. */ while ((TotalReceivedCount != TEST_BUFFER_SIZE) || (TotalSentCount != TEST_BUFFER_SIZE)) { } /* * Verify the entire receive buffer was successfully received. */ for (Index = 0; Index < TEST_BUFFER_SIZE; Index++) { if (ReceiveBuffer[Index] != SendBuffer[Index]) { return XST_FAILURE; } } return XST_SUCCESS; } /*****************************************************************************/ /** * * This function is the handler which performs processing to send data to the * UartLite. It is called from an interrupt context such that the amount of * processing performed should be minimized. It is called when the transmit * FIFO of the UartLite is empty and more data can be sent through the UartLite. * * This handler provides an example of how to handle data for the UartLite, * but is application specific. * * @param CallBackRef contains a callback reference from the driver. * In this case it is the instance pointer for the UartLite driver. * @param EventData contains the number of bytes sent or received for sent * and receive events. * * @return None. * * @note None. * ****************************************************************************/ void SendHandler(void *CallBackRef, unsigned int EventData) { TotalSentCount = EventData; } /****************************************************************************/ /** * * This function is the handler which performs processing to receive data from * the UartLite. It is called from an interrupt context such that the amount of * processing performed should be minimized. It is called data is present in * the receive FIFO of the UartLite such that the data can be retrieved from * the UartLite. The size of the data present in the FIFO is not known when * this function is called. * * This handler provides an example of how to handle data for the UartLite, * but is application specific. * * @param CallBackRef contains a callback reference from the driver, in * this case it is the instance pointer for the UartLite driver. * @param EventData contains the number of bytes sent or received for sent * and receive events. * * @return None. * * @note None. * ****************************************************************************/ void RecvHandler(void *CallBackRef, unsigned int EventData) { TotalReceivedCount = EventData; } /****************************************************************************/ /** * * This function setups the interrupt system such that interrupts can occur * for the UartLite device. This function is application specific since the * actual system may or may not have an interrupt controller. The UartLite * could be directly connected to a processor without an interrupt controller. * The user should modify this function to fit the application. * * @param UartLitePtr contains a pointer to the instance of the UartLite * component which is going to be connected to the interrupt * controller. * * @return XST_SUCCESS if successful, otherwise XST_FAILURE. * * @note None. * ****************************************************************************/ int SetupInterruptSystem(XUartLite *UartLitePtr) { int Status; /* * Initialize the interrupt controller driver so that it is ready to * use. */ Status = XIntc_Initialize(&InterruptController, INTC_DEVICE_ID); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Connect a device driver handler that will be called when an interrupt * for the device occurs, the device driver handler performs the * specific interrupt processing for the device. */ Status = XIntc_Connect(&InterruptController, UARTLITE_INT_IRQ_ID, (XInterruptHandler)XUartLite_InterruptHandler, (void *)UartLitePtr); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Start the interrupt controller such that interrupts are enabled for * all devices that cause interrupts, specific real mode so that * the UartLite can cause interrupts through the interrupt controller. */ Status = XIntc_Start(&InterruptController, XIN_REAL_MODE); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Enable the interrupt for the UartLite device. */ XIntc_Enable(&InterruptController, UARTLITE_INT_IRQ_ID); /* * Initialize the exception table. */ Xil_ExceptionInit(); /* * Register the interrupt controller handler with the exception table. */ Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_INT, (Xil_ExceptionHandler)XIntc_InterruptHandler, &InterruptController); /* * Enable exceptions. */ Xil_ExceptionEnable(); return XST_SUCCESS; } The problem is that the code gets stuck in the while loop (as it did with the other interrupt examples) and is always waiting for the interrupt. In either case the event that triggers the interrupt has occurred and the interrupt signal goes high but the controller never acknowledges the interrupt nor runs the handler. I am needing some help as to what is going wrong here and I'm not sure if its the hardware or software. Thanks,
  4. Hi @jpeyron I am using windows 10. I updated the port drivers and restarted the pc and it looked like Vivado can find my device again. Do you know how I can format the flash, so the device is like new? Thanks!
  5. Hi All, I have recently downloaded Vivado 2018.2 and begun playing around with CMOD A7 35T. I did the the blinky tutorial and then just finished Cmod A7 Programming Guide. At the end of which, I programmed the button project into the flash memory of the device. I then disconnected the device and plugged it back in to verify the code was loaded onto the device on startup. The code indeed loaded and I can light the LEDs with the corresponding button; however, now my host pc cannot find the target device anymore. I tried restarting Vivado and plugging and unplugging the FPGA board and nothing seems to get it to show up in the hardware manager wizard or autoscan. I'm pretty new to FPGA programming so I could use some help to get my board reconnected and the program in Flash erased. Thanks