• Content Count

  • Joined

  • Last visited

  • Days Won


MauroChimenti last won the day on July 3 2018

MauroChimenti had the most liked content!

About MauroChimenti

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello, It's quite clear and "simple" understand how a new device driver is added in the sdk using the xilinx base libraries, but i i want to see the device in the /dev in linux. I don't know how link correctly this path, i suppose related to define the device tree and peraphs have a different driver code linux compatible. Where I can find documentation about that? Now i'm trying to see in the /dev the PmodGPIO, all work fine at the bare SDK level, but i don't see the device in linux. Thanks
  2. Hello all, I followed this guide : to install on the arty-z7-20 and ubuntu (ubuntu-14.04.4-minimal-armhf-2016-04-02.tar.xz) or debian (debian-9.4-minimal-armhf-2018-03-26.tar.xz) distribution from this site All steps are ok, and i have the prompt login on the usb serial or the ssh, but if i use ubuntu/tmppwd or debian/tmppwd , I can't access in both the distributions. At first the printed error was : I can't step in /home/ubuntu or in home/debian, permission denied. I checked the +X rights and the ownership directly for the home folders. The X rights were ok, but owner was wrong and i changed it with debian:debian for home/debian and ubuntu:ubuntu Now the error is changed in :" bin/bash permission denied", but i see a regular configuration for sh ( a symbolic link to bin/bash with full rights) Any suggestion, thanks? I found the issue. Simply a problem in the sd card partition 2. Reformatting the issue is gone
  3. Hello, After about a week of total disperation I discovered the reason of the issue. I have fast internet line about 100 Mbits and 5 ms ping. The reason of the build failure in related to the speed or better at the very slow ping. I really don't understand why but more Ilimit the speed or increase the ping up to 100ms the issue disappers. Actually a simply limited the VM Eth port with a netem rule: sudo tc qdisc add dev enp0s3 root netem delay 100ms
  4. Hello, I tried to upgrade python3 and git, but nothing is changed: Actually I have: python3.5 3.5.2-2ubuntu0 amd64 Interactive high-level object-oriented lang git 1:2.7.4-0ubunt amd64 fast, scalable, distributed revision contro The global git config is surely a clean empty one, because the VM is brand new (uhmm .. an empty git global config could be the issue). The global and system git configuration were empty. I created a base configuration but nothing is changed. --------------- .gitconfig ---------------------------------- [user] name = Mauro Chimenti email = -------------------------------------------------------------------- I'm sure the issue is little configuration detail somewhere. In the Xilinx forum, just like here, no one reported my issue and all describe the same steps i did. I started from a brand new VM (several times), so I really don't understand what I missed. If I try to build the Arty-z7-20 project with the 2018.2 (or 2018.1) petalinux version, i see all fetches go ahead correctly, compile 99% and finally stops with an expected insanity kernel error. All version older than 2018.1 fails (i tried 2017.4, 2017.3, 2017.2 and 2016.4) dpkg list.txt
  5. Hello, I restarted again.with a new VM this time with an Ubuntu 16.04.1 LTS, all configuration steps done without any error. Always the same results. In attachment the project conf file (Arty-Z7-20) cloned from the digilent repos. I attached even my printev because i'm sure the issue is related to something outside the project, for example enviroment vars or lib releaseas. I'm able to ping, git://, git:// I think something related to the url with some vars inside example: PETALINUX_VER=2017.4 --> CONFIG_PRE_MIRROR_URL="${PETALINUX_VER}/downloads". But all i see seems correct Arty-z7-20-config.txt errors.txt printenv.txt
  6. Hello, Looking into the failure logs simply is the last of tens mirrors tried, but the first one is the The issue seems not related to the project, because i tried many different projects and all have the same behaviour. More: I even tried to verify the installation and the system. using different petalinux versions with a xilinx reference project (xilinx-zc702) all in the same ubuntu 16.04.4 LTS and i had: version 2018.2 project xilinx-zc702 built successfully, version 2018.1 project xilinx-zc702 built successfully, version 2017.4 xilinx-zc702 fails, version 2017.3 xilinx-zc702 fails. The project Petalinux-Arty-z7-20 is exaclty the one checked out from the digilent repo (but i tried the Zybo and the z7-10 too), note: if I try to build it with the 2018.2 all fetches are done correctly but i have an aspected failure for kernel_insanity. I create three new Virtual Box VM, the first two using the iso directly downloaded from the ubuntu site and the last one a vdi image from os boxes under rpickeri's suggestion . I linked sh->bash and even tried to link sh.distrib->bash and static-sh->bash I'm not inside any VPN or strange connection. I even tried on one other computer and another internet provider. I'm very close to give up. I'm sure i missed something in the sys configuration out of the project, or really now the xilinx remote links for the 2017 releases have problems and you all don't see the issue because already have cached all files locally.
  7. Hello, After have studied all logs i noticed that the main problem is related to the site '" First petalinux tries to download ', but it fails and after tries other mirrors . If I disable network access (in yocto petalinux-config) i have another error: gcc-source-linaro-6.2-linaro-6.2-r2016.11 do_fetch: Network access disabled through BB_NO_NETWORK (or set indirectly due to use of BB_FETCH_PREMIRRORONLY) but access requested with command /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/downloads '' (for url None) So this file is needed. Any help to localte this file: '". Do i have a dns problem? because I cant even reach
  8. Hello, I was just supposing that git clone --recursive .... should create a complete repository cloning with all subreps ready to be used. What does it mean "Set a MACHINE in you local.conf"? I have to specify what kind of board or zynq a have, or what else? I just checked under Petalinux-Arty-Z7-20/Arty-Z7-20/project-spec/meta-user/recipes-apps/digilent-apps/ and I have : gpioutil kmsdemo libgpio libpwm libuio libvrc pwmdemo but they aren't git reps , only one file inside them, the same related to the error. example : /Petalinux-Arty-Z7-20/Arty-Z7-20/project-spec/meta-user/recipes-apps/digilent-apps/libpwm/ so I have all 3 lib*.bb file and I have : /opt/pkg/petalinux/components/yocto/source/arm/layers/meta-linaro-toolchain/recipes-devtools/gcc/ Anyway for all them Petalinux tries to download them and fails. Any possibile wrong configuration with petalinux-config? ------------------------------------------------------------------------------------------------------------------------------ Now i tried some different configurations: limiting at 1 thread and job the something is changed. I just reset teh build state with: petalinux-build -c u-boot -x distclean petalinux-build -x mrproper and now many errors are disappered. Onlly the last one about linario is still present: The repos is downloaded but failes something inside it .. ---------------------------------------------------------------------- WARNING: gcc-source-linaro-6.2-linaro-6.2-r2016.11 do_fetch: Failed to fetch URL git://;protocol=https;branch=linaro-local/releases/linaro-6.2-2016.11, attempting MIRRORS if available ERROR: gcc-source-linaro-6.2-linaro-6.2-r2016.11 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-RfFQQEf0o9"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export GIT_SSL_CAINFO="/opt/pkg/petalinux/components/yocto/source/arm/buildtools/sysroots/x86_64-petalinux-linux/etc/ssl/certs/ca-certificates.crt"; export PATH="/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots-uninative/x86_64-linux/usr/bin:/opt/pkg/petalinux/components/yocto/source/arm/layers/core/scripts:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/x86_64-linux/usr/bin/arm-xilinx-linux-gnueabi:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/plnx_arm/usr/bin/crossscripts:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/x86_64-linux/usr/sbin:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/x86_64-linux/usr/bin:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/x86_64-linux/sbin:/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/sysroots/x86_64-linux/bin:/opt/pkg/petalinux/components/yocto/source/arm/layers/core/scripts:/opt/pkg/petalinux/components/yocto/source/arm/layers/core/bitbake/bin:/opt/pkg/petalinux/components/yocto/source/arm/sysroots/x86_64-petalinux-linux/usr/bin:/opt/pkg/petalinux/components/yocto/source/arm/buildtools/sysroots/x86_64-petalinux-linux/usr/bin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/bin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/sbin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/bin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/sbin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/bin/../x86_64-petalinux-linux/bin:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/bin/arm-xilinx-linux-gnueabi:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/bin/arm-xilinx-linux-uclibc:/opt/pkg/petalinux/components/yocto/source/arm/tmp/sysroots/x86_64-linux/usr/bin/arm-xilinx-linux-musl:/opt/pkg/petalinux/tools/common/petalinux/utils:/opt/pkg/petalinux/tools/linux-i386/petalinux/bin:/opt/pkg/petalinux/tools/linux-i386/petalinux/bin/unexport:/opt/pkg/petalinux/tools/hsm/bin:/opt/pkg/petalinux/tools/webtalk/bin:/opt/pkg/petalinux/tools/linux-i386/petalinux/bin:/opt/pkg/petalinux/tools/common/petalinux/bin:/opt/pkg/petalinux/tools/linux-i386/gcc-arm-none-eabi-r5/bin:/opt/pkg/petalinux/tools/linux-i386/microblaze-xilinx-elf/bin:/opt/pkg/petalinux/tools/linux-i386/microblazeel-xilinx-linux-gnu/bin:/opt/pkg/petalinux/tools/linux-i386/gcc-arm-none-eabi/bin:/opt/pkg/petalinux/tools/linux-i386/gcc-arm-linux-gnueabi/bin:/opt/pkg/petalinux/tools/linux-i386/aarch64-none-elf/bin:/opt/pkg/petalinux/tools/linux-i386/aarch64-linux-gnu/bin:/home/mauro/bin:/home/mauro/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"; export HOME="/home/mauro"; LANG=C git -c core.fsyncobjectfiles=0 fetch -f --prune --progress refs/*:refs/* failed with exit code 128, output: fatal: Refusing to fetch into current branch refs/heads/master of non-bare repository ERROR: gcc-source-linaro-6.2-linaro-6.2-r2016.11 do_fetch: Fetcher failure for URL: 'git://;protocol=https;branch=linaro-local/releases/linaro-6.2-2016.11'. Unable to fetch URL from any source. ERROR: gcc-source-linaro-6.2-linaro-6.2-r2016.11 do_fetch: Function failed: base_do_fetch ERROR: Logfile of failure stored in: /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/work-shared/gcc-linaro-6.2-r2016.11/temp/log.do_fetch.8647 ERROR: Task (/opt/pkg/petalinux/components/yocto/source/arm/layers/meta-linaro-toolchain/recipes-devtools/gcc/ failed with exit code '1' NOTE: Tasks Summary: Attempted 132 tasks of which 131 didn't need to be rerun and 1 failed. Summary: 1 task failed: /opt/pkg/petalinux/components/yocto/source/arm/layers/meta-linaro-toolchain/recipes-devtools/gcc/ Summary: There was 1 WARNING message shown. Summary: There were 3 ERROR messages shown, returning a non-zero exit code. ERROR: Failed to build project ------------------------------------------------------------------------------------------------------------------
  9. Hello, I followed all indications for Petalinux-Zybo-Z7-20 (and some hints see here around): Petalinux 2017.4 , Brand new Ubuntu 16.04.3 LTS (VM in virtualbox) in details: After I created the VM i added all required libraries: ------------------ sudo -s apt-get install tofrodos gawk xvfb git libncurses5-dev tftpd zlib1g-dev zlib1g-dev:i386 \ libssl-dev flex bison chrpath socat autoconf libtool texinfo gcc-multilib \ libsdl1.2-dev libglib2.0-dev screen pax reboot -------------------- ALL OK sudo -s apt-get install tftpd-hpa chmod a+w /var/lib/tftpboot/ reboot -------------------- ALL OK sudo -s mkdir -p /opt/pkg/petalinux chown <your_user_name> /opt/pkg/ chgrp <your_user_name> /opt/pkg/ chgrp <your_user_name> /opt/pkg/petalinux/ chown <your_user_name> /opt/pkg/petalinux/ exit ----------------- cd ~/Downloads ./ /opt/pkg/petalinux ----------------- ALL OK I changed dash to bash as default terminal (to avoid the warning about the bash terminal) : sudo dpkg-reconfigure dash and set the enviroment variables: source /opt/pkg/petalinux/ --------------- ALL OK (No warning related to NO BASH) git clone --recursive ------------------- ALL OK petalinux-build ---------- THIS IS THE POINT I HAVE ALL ERRORS ----------------- Note: If I create the project by the BDS release file using : petalinux-create -t project -s <path to .bsp file> i had the same errors. I tried even other projects and all behave similarly. I even added the git --- config to manage https in place of http but nothing changed. If i try to clone reps manually the address works with http to. I noticed before every error few seconds of process stopped for the digilent reps (probably because try to load the rep) instead with the linaro_lib all data is downloaded but the task is marked as failed.
  10. Hello, I have a problem quite similar to the one discussed in "Petalinux-Zybo-Z7-20 project doesn't build". I followed exactly all suggestions posted here and inside the Xilinx documentation, in brief: All libraries are been installed, bash as shell, a brand new 16.04.3 LTS ubuntu (even tried twice to be sure) . I tried to create the project by the BSP and/or cloning the repo. I even tried the suggestion posted in "Petalinux-Zybo-Z7-20 project doesn't build", but nothing is changed. I have errors and fetches failures: Many like these ones: -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ERROR: pkgconfig-0.29.1+gitAUTOINC+87152c05be-r0 do_populate_sysroot_setscene: Error executing a python function in exec_python_func() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_python_func() autogenerated', lineno: 2, function: <module> 0001: *** 0002:do_populate_sysroot_setscene(d) 0003: File: '/opt/pkg/petalinux/components/yocto/source/arm/layers/core/meta/classes/staging.bbclass', lineno: 238, function: do_populate_sysroot_setscene 0234:do_populate_sysroot[sstate-outputdirs] = "${STAGING_DIR_HOST}/" 0235:do_populate_sysroot[stamp-extra-info] = "${MACHINE}" 0236: 0237:python do_populate_sysroot_setscene () { *** 0238: sstate_setscene(d) 0239:} 0240:addtask do_populate_sysroot_setscene 0241: 0242: File: '/opt/pkg/petalinux/components/yocto/source/arm/layers/core/meta/classes/sstate.bbclass', lineno: 659, function: sstate_setscene 0655: break 0656: 0657:def sstate_setscene(d): 0658: shared_state = sstate_state_fromvars(d) *** 0659: accelerate = sstate_installpkg(shared_state, d) 0660: if not accelerate: 0661: bb.fatal("No suitable staging package found") 0662: 0663:python sstate_task_prefunc () { File: '/opt/pkg/petalinux/components/yocto/source/arm/layers/core/meta/classes/sstate.bbclass', lineno: 327, function: sstate_installpkg 0323:, d, (sstateinst,)) 0324: 0325: for state in ss['dirs']: 0326: prepdir(state[1]) *** 0327: os.rename(sstateinst + state[0], state[1]) 0328: sstate_install(ss, d) 0329: 0330: for plain in ss['plaindirs']: 0331: workdir = d.getVar('WORKDIR', True) Exception: FileNotFoundError: [Errno 2] No such file or directory: '/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/pkgconfig/0.29.1+gitAUTOINC+87152c05be-r0/sstate-install-populate_sysroot/sysroot-destdir' -> '/home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/pkgconfig/0.29.1+gitAUTOINC+87152c05be-r0/sysroot-destdir' WARNING: Logfile for failed setscene task is /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/pkgconfig/0.29.1+gitAUTOINC+87152c05be-r0/temp/log.do_populate_sysroot_setscene.4795 WARNING: Setscene task (/opt/pkg/petalinux/components/yocto/source/arm/layers/core/meta/recipes-devtools/pkgconfig/ failed with exit code '1' - real task will be run instead --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- and some fetch failures: NOTE: Tasks Summary: Attempted 960 tasks of which 955 didn't need to be rerun and 4 failed. Summary: 4 tasks failed: /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/project-spec/meta-user/recipes-apps/digilent-apps/libgpio/ /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/project-spec/meta-user/recipes-apps/digilent-apps/libuio/ /home/mauro/Projects/Petalinux-Arty-Z7-20/Arty-Z7-20/project-spec/meta-user/recipes-apps/digilent-apps/libpwm/ /opt/pkg/petalinux/components/yocto/source/arm/layers/meta-linaro-toolchain/recipes-devtools/gcc/ Summary: There were 5 WARNING messages shown. Summary: There were 60 ERROR messages shown, returning a non-zero exit code. ERROR: Failed to build project --------------------------------------------------------------------------------------- for last ones i tried to change the git configuration for https but nothing in changed.. Anyone can help me? I spent an entire day trying anything ... I'm quite desperate