Jump to content

cjones

Members
  • Posts

    7
  • Joined

  • Last visited

Reputation Activity

  1. Like
    cjones reacted to JColvin in Looking for alternative way to interface with the Electronics Explorer... My USB is DESTROYED.   
    Hi @cjones,
    Unfortunately, as far as I understand, that USB port is the only way to configure the board. The schematics for the Electronics Explorer board are available on it's Resource Center: https://digilent.com/reference/test-and-measurement/electronics-explorer/start, though I'm not seeing any way to otherwise access the device (that and you would not be able to directly control the board with WaveForms through a JTAG port anyways).
    Let me know if you have any questions.
    Thanks,
    JColvin
  2. Like
    cjones reacted to attila in Looking for alternative way to interface with the Electronics Explorer... My USB is DESTROYED.   
    Hi @cjones
    The usb socket can be soldered to the top layer, shield to gnd, just be careful to not get solder in the socket.
    You could replace the socket if broken or solder the usb wires to the pads, but pay attention for correct order: vbus, d-/+, id, gnd


  3. Like
    cjones reacted to JColvin in Anyone have a copy of "Cerebot32mX4.h"   
    Hi @cjones,
    The board is retired so I'll be of limited help beyond that, but the materials you are looking for can be found as part of the Digilent core for the Arduino IDE: https://github.com/Digilent/digilent-core.
    I believe the specific files you are looking for will be here: https://github.com/Digilent/digilent-core/tree/master/pic32/variants/Cerebot_32MX4.
    Thanks,
    JColvin
×
×
  • Create New...