Jump to content

mohammadhgh

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by mohammadhgh

  1. Hi @Mahesh, As @jpeyron said in the post marked as accepted solution, the Zynq processing system will be configured with the board presets when you first add the Zynq processing system IP core to the block design and run the block automation task from the green message that appears! Just remember to keep the Apply Board Preset option checked as shown in he picture. So this means if you are using the pre-built block design from the example project, a possible solution can be to remove the existing Zynq processing system block and adding a new one!
  2. @BogdanVanca Thank you for you reply. I tried to add the board_files for Zybo Z7-20 to Vivado 2017.4 using the instructions in this, but the Zybo Z7-20 board still does not appear while configuring the Zynq7 Processing System IP in Vivado IP Integrator. when trying to apply configuration, it just accepts .tcl files and not .xml files. Also importing the presets.xml file through the "Import XPS Settings" button seems to have no effect! I found that .tcl file for the Zybo board here but it was not available for Zybo Z7-20. Is it possible to use the ZYBO_C.tcl for the Zybo Z7-20 too? Or how can I fix the problem that Zybo Z7-20 does not appear in the Vivado presets list? Thank you in advance.
  3. Hello everyone, I have just started a project with the Zybo Z7-20 board and I am trying to build a simple system using Vivado IP Integrator. I have added the Zybo Z7-20 board files to the Vivado but the board still does not appear in the presets for Zynq Processing System. Also I was not able to find any presets tcl file for the board in the internet. Does any one know where can I find this presets tcl file for the board is there any reference Vivado project for the board to start with?
×
×
  • Create New...