Jiandan

Members
  • Content Count

    10
  • Joined

  • Last visited

About Jiandan

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Dear Kristoff Thanks a lot , I tested it several times and found that using WaveForms live would be a little more successful and slightly more successful, but there would be an update failure too (LED1 OFF). I hope that you give a lower baud rate bootloader when you are free, thanks.
  2. Dear Kristoff You are really very smart, it should be the problem of this bootloader.How to solve it.
  3. Dear Kristoff, I try to use upload firmware to the OpenScope MZ using WaveForms Live.It is successful.Thank you! But this serial download with problem should be solved ,because using WaveForms Live need net support it that it is not convenience. In addition,I try to use he hex file generated by the arduino IDE that after downloading it with the PICkit 3 but it does not work.As you said that the hex file produced by the Arduino IDE does not include the bootloader so programming it to the OpenScope with a PICkit 3 will likely override the bootloader. Thanks a lot !
  4. Dear Digilent engineers! I was surprised to find a Interesting things that the hex file generated by the arduino IDE that after downloading it with the PICkit 3 but it does not work. How to make it work.
  5. Thanks dear Kristoff. I do it in WIN10 and with USB High Speed Port.Besides,I test it in other students PC ,but it always failed. Now I want a lower baud to test, In order to solve this problem that bothers me.Dear Kristoff ,can you give a bootloader with a low speed baud rate (115200 or others) to test it.Thanks a lot!
  6. Dear Digilent engineers I found that the OpenscopeMZ board often suffers from uploading errors at such a high baud rate of 1250000. Dear Digilent engineers can give a bootloader with a low speed baud rate (115200).Thanks a lot! Arduino IDE information: DigilentPGM V1.00 Digilent Copyright 2016 Written by Keith Vogel Comm Port: COM6 Baud rate set to: 115200 Extended Digilent Bootloader Found Board Name: OpenScope Vendor: Digilent Bootloader Version: 0x2010001 Capabilities: 0x170f0631 Device ID: 0x17218053 Flash Page Size: 16384 Flash Row Size: 2048 Baud rate set to: 1250000 Processing HEX file: C:\Users\victory\AppData\Local\Temp\build165fca84ebe346105b2c775e8473ba0c.tmp/OpenScope.ino.hex Opened HEX file: C:\Users\victory\AppData\Local\Temp\build165fca84ebe346105b2c775e8473ba0c.tmp\OpenScope.ino.hex Successfully processed HEX file: C:\Users\victory\AppData\Local\Temp\build165fca84ebe346105b2c775e8473ba0c.tmp/OpenScope.ino.hex Program block size: 2048 bytes Number of blocks: 251 Program size: 514048 bytes HEX file processing time: 0s 90ms Starting Programming: 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 0123456789 012345678TimedOut waiting for Serial Response Failed to program data at address: 0x1d078000 Program time: 19s 6ms TimedOut waiting for Serial Response Unable to program HEX file End of Program
  7. Dear Digilent engineers I also have such a demand, that I would like to use the serial port 1 to send data to my arduino UNO board. But I do not know how to add a serial port 1 in the OpenScopeMZ firmware.Can Digilent engineers help us by take a few minutes. Thanks a lot.
  8. Oh,Thats cool,can you give the MPLABX project (zip) for me? I am interested in it. You can give me a link or send me a mail(victory_it@163.com).Thanks a lot!
  9. Dear @Kristoff Consider this.Can you give us a MPLAB X project with OpenScopeMZ firmware.Then we can do some IO thing and others with it?Thanks .