tester11

Members
  • Content Count

    41
  • Joined

  • Last visited

About tester11

  • Rank
    Frequent Visitor

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Arty Z7-10,so I can use IO0-IO-13 and A0-A11? Can you take a look please for the connector JB bottom row output? I also set for the third gpio to have all outputs and width 4
  2. the pins for the IO28-41 are not available in the xdc file .I tried to set the bottom row of the connector JB like this set_property -dict ( PACKAGE_PIN V12 IOSTANDARD LVCMOS33} [get_ports {GPIO_tri_o[3]}] set_property -dict ( PACKAGE_PIN V16 IOSTANDARD LVCMOS33} [get_ports {GPIO_tri_o_tri_o[2]}] set_property -dict ( PACKAGE_PIN T11 IOSTANDARD LVCMOS33} [get_ports {GPIO_tri_o[1]}] set_property -dict ( PACKAGE_PIN W14 IOSTANDARD LVCMOS33}PACKAGE_PIN V16 [get_ports {GPIO_tri_o[0]}] And I got [Place 30-415] IO Placement failed due to overutilization. This design contains 108 I/O ports while the target device: 7z010 package: clg400, contains only 70 available user I/O. The target device has 230 usable I/O pins of which 160 are already occupied by user-locked I/Os. To rectify this issue: 1. Ensure you are targeting the correct device and package. Select a larger device or different package if necessary. 2. Check the top-level ports of the design to ensure the correct number of ports are specified. 3. Consider design changes to reduce the number of I/Os necessary. [Place 30-68] Instance GPIO_tri_o_OBUF[0]_inst (OBUF) is not placed https://image.prntscr.com/image/SNP4l3BKSkuszo9vgmRuwA.png the last gpio is made external
  3. I use also other Pmods,no smoking,no damage as I see. Hard error should mean a bad interaction with the Pmod,am I right?
  4. It doesn't ,I tried with your example from another topic that worked in the past ,now it doesn't. I remember that in the past when I used the http server on the same example it worked only after I turned it down and started it again but now I tried this too many times. Can it be broken? I didn't put any force on it .
  5. I used the same http server files already configured that worked in other project,I checked a few times the user and password are correct .Yes ,the metal region is too hot to be touched after 2/3 minutes of running the server
  6. I run the httpserver on an Arty board and I get in console WiFi Connection Established Dynamic begin Is Linked to the physical network Link status: 0x0 Timeout occured Shutting down Resting for 30 seconds 30 seconds until restart 10 seconds until restart Done resting WiFi Connection Established Dynamic begin Is Linked to the physical network Link status: 0x0 Timeout occured Shutting down Resting for 30 seconds 30 seconds until restart 10 seconds until restart Done resting WiFi Connection Established Dynamic begin Is Linked to the physical network Link status: 0x0 Not Initialized Hard Error status 0x10011007 occurred. Shutting down Resting for 30 seconds 30 seconds until restart 20 seconds until restart So I don't get anymore Network initialized .What can cause this problem?The Pmod also overheats.
  7. I still can't find anywhere where is set T14 or B20
  8. Can you explain how to set up the pins a bit please? You made the project but I don't understand how you changed the pin names and set them. https://image.prntscr.com/image/Y33lNj1rTQeIUPEAr5PG6A.png In the right are your changes.I disconnedted the pmod output from Wifi pmod,made it external and then tried to see what pins I will use but I couldn't figure out the rule to change from PACKAGE_PIN B20 to PACKAGE_PIN T14
  9. Well,is there an option to send in a form a huge string and be received as a a packet by the FPGA ?This looks way easier.I mean eveything can be send as a string even a movie.
  10. I want to send 2 files that combined have under 5 mb only once .I thought to use tcp but the example is not very clear for me and I want to use the http server.
  11. I did that already,it isn't defined there and I updated the design wrapper. Uploading files with http server can be done for Arty or it needs linux ?
  12. https://image.prntscr.com/image/knicdkf7RV_HCneXUPsWqw.png Also is there some tutorial to upload files with HTTP server to the FPGA ? Also with addPINs(XPAR_PS7_GPIO_0_BASEADDR+0, 4, 0) on website I can't make anything change on website and the FPGA get's hot near the switch area
  13. Also on addPins functions ,even if I regenerated design wrapper the new elements won't appear in xparameters.h I renamed axi_gpio_1 to led and I can't find it anywhere.In the example it is used AXI and for me only PS7 works... addPINs(XPAR_PS7_GPIO_0_BASEADDR+0, 4, 0); addPINs(XPAR_LED_BASEADDR+0, 4, 0); doesn't work
  14. For the Arty I use my phone hotspot and I try to connect with the laptop....I saw that you had the same problem in the past on another post,my problem is exactly the same Works ,but only on the same networks as I can see...
  15. Thanks,worked ,it shows 5 Sockets Listening on IP: ***, but if I connect to that ip it doesn't load "took too long to respond" .Can this problem be generated because the micro SD has 32 Gbs storage capacity?