PhDev

Members
  • Content Count

    16
  • Joined

  • Last visited

  • Days Won

    1

Reputation Activity

  1. Like
    PhDev got a reaction from sieg70 in The E9 pin of xc7a100tcsg324-1   
    Hi @sieg70
    You can use the STARTUPE2 primitive to access E9.
    STARTUPE2_i : STARTUPE2 port map ( CFGCLK => open, -- 1-bit output: Configuration main clock output CFGMCLK => open, -- 1-bit output: Configuration internal oscillator clock output EOS => open, -- 1-bit output: Active high output signal indicating the End Of Startup. PREQ => open, -- 1-bit output: PROGRAM request to fabric output CLK => '0', -- 1-bit input: User start-up clock input GSR => '0', -- 1-bit input: Global Set/Reset input (GSR cannot be used for the port name) GTS => '0', -- 1-bit input: Global 3-state input (GTS cannot be used for the port name) KEYCLEARB => '0', -- 1-bit input: Clear AES Decrypter Key input from Battery-Backed RAM (BBRAM) PACK => '0', -- 1-bit input: PROGRAM acknowledge input USRCCLKO => SPI_Clk, -- 1-bit input: User CCLK input USRCCLKTS => '0', -- 1-bit input: User CCLK 3-state enable input USRDONEO => '0', -- 1-bit input: User DONE pin output control USRDONETS => '0' -- 1-bit input: User DONE 3-state enable output ); With this SPI_Clk goes to E9.