Samuel Christopher

Members
  • Content Count

    3
  • Joined

  • Last visited

About Samuel Christopher

  • Rank
    Newbie

Recent Profile Visitors

212 profile views
  1. Hi Attila, Do you have any application installed for other FTDI based devices, like USB-UART, USB-JTAG/SPI programmer ? NO other FTDI devices You might also verify that the Load VCP option is not checked: its already uncheck, still the same problem even though i changed number of USB cables, Updated driver, i done device fix program also, even though giving the same error,kindly do needful Can u please rectify my issue and can make use of My analo Discovery 2 NI edition Thanks
  2. HI Attila,

    Greetings,

    hope u would help me in this reagrard

    HI ,

    iam using Analog Discover 2 NI edition, for the first time, i used and measured the RC circuit analysis with Waveform 2015 ,i connected with USB and also external supply also i connected , when i opened digilent waveforms its directly connected and status is OK, then i measured , but all of  sudden after its not at  all detecting the device, when am selecting the current device in configuration settings its saying the error :DptilO failed ERC:0x2, the device is using by another application .device programming failed .i had used for other PC also saying the same, my Lappy USB serial drivers are also working fine. i connected another analog discovery first version its detected and working fine , but am facing the error when connected with analog Discovery 2 NI edition

    i uninstalled waveforms 2015 and again installed, rebooted my windows 8.1, windows 7 , but the same error is comming .DptilO failed ERC:0x2, the device is using by another application .device programming failed.

    Kindly help me to sort out he issue

    Reagrds

    Samuel Christopher

    Sr.FAE-Technical

     

    Capture.JPG

  3. HI , iam using Analog Discover 2 NI edition, for the first time, i used and measured the RC circuit analysis with Waveform 2015 ,i connected with USB and also external supply also i connected , when i opened digilent waveforms its directly connected and status is OK, then i measured , but all of sudden after its not at all detecting the device, when am selecting the current device in configuration settings its saying the error :DptilO failed ERC:0x2, the device is using by another application .device programming failed .i had used for other PC also saying the same, my Lappy USB serial drivers are also working fine. i connected another analog discovery first version its detected and working fine , but am facing the error when connected with analog Discovery 2 NI edition i uninstalled waveforms 2015 and again installed, rebooted my windows 8.1, windows 7 , but the same error is comming .DptilO failed ERC:0x2, the device is using by another application .device programming failed. Kindly help me to sort out he issue Reagrds Samuel Christopher Sr.FAE-Technical