I am trying to boot embedded linux on Zynq Zybo with reference to this document: http://184.108.40.206/pdf/0/7/6/4/8/07648722.pdf
I have created boot.bin(containing FSBL.elf, my custom hardware bit file and u-boot.elf) devicetree.dtb, uimage and uramdisk.img.gz in ZYBO_BOOT in sdcard as given. When I tried to boot Zybo inserting SD card in the board, nothing shows in the hyperterminal.
Instead of my custom hardware, I have created a boot.bin file from the ZYBO Base System Design (available on the ZYBO product page of the Digilent website). Now it responded but showed the following error in the hyperterminal:
MAC Addr: D8 80 39 5C F9 FC
No valid device tree binary found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d initcall sequence 04062bf8 failed at call 04046944 (err=-1)
ERROR ### Please RESET the board
I think the error is from the u-boot-digilent/lib/fdtdec.c when CONFIG_SPL_BUILD is not defined. But the reason for not defining it is not known!
What would be the reason?