fhhull
-
Posts
1 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Everything posted by fhhull
-
So I have a question... I am trying to use my basys 3 fpga board to complete this assignment for my class... the problem is that the class is using the spartan 3 board, and ISE design suite... I have tried many times to download the ISE software but the thing does not work because of the licensing... attached below is my lab... I have written the VHDL code for the outputs as follow:
W <= (NOT A AND D) OR (A AND NOT D) OR (B) OR (C);
X <= (NOT A AND NOT C AND NOT D) OR (A AND D) OR (B AND NOT D) OR (C AND D);
Y <= (B OR NOT D) AND (NOT C OR D);
Z <= ( A OR B OR NOT D) AND ( NOT B OR C);
now when I am trying to match this to the master xdc and I am trying to use switches 0-4 for the inputs a-d, and I need to use the 7 segment display to represent the outputs as it is in the attachment... It is not working or I dont know how to do it... can anyone help me please
-
Hi @fhhull,
You can only use Vivado with the basys 3 but you can use the same vhdl code. so A,B,C,D will be the for switches and W,X,Y, Z will be the different points on the 7 seg display. So here is a tutorial using the 7 seg display with a 4 bit input(switches). You will need to change the what pins are on based on you truth table. you will need a counter that runs a 4-1 mux as well as the anodes. Your design should look something like the design here.
cheers,
Jon
-
