Garrett A

Technical Forum Moderator
  • Content Count

    3
  • Joined

  • Last visited

About Garrett A

  • Rank
    Newbie

Profile Information

  • Gender
    Male

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Garrett A

    Nexys4 DDR Mechanicals.

    Hello Stanislav, I have double checked the location for JXADC pin 1 (center of hole), and it is correct. I believe that you are actually inquiring about J18. Which has a pin 1 location of (96.24, 37.97). Cheers, Garrett
  2. Garrett A

    Nexys4 DDR Mechanicals.

    Hello Stanislav, Assuming the bottom left corner of the board is (0, 0). Here are your requested coordinates. The buttons are measured from center. All measurements are in millimeters. BTNR = 113.4, 18.1 BTNL = 95.5, 18.1 BTNU = 104.5, 27.1 BTND = 104.5, 9.1 BTNC = 104.5, 18.1 PROG = 102.5, 82.6 CPU_RESET = 102.5, 91.5 JP4 pin 1 = 85.45, 82.6 JXADC pin 1 = 124.25, 118.35 Cheers, Garrett
  3. Garrett A

    Nexys4 DDR Mechanicals.

    Hello Popest, I have pulled the exact measurements from the Altium project and attached a couple photos showing these. Hopefully, this will help. If you require anything else, do not hesitate to ask. Cheers, Garrett Aufdemberg Senior Design Engineer