Skylär Astaröt

Now that Digilent has deigned to launch a new product, I have an opportunity that I would like to take advantage of. The USB104 A7: Artix-7 FPGA Development Board with SYZYGY-compatible Expansion. This board allows me to test it for the traininf of DOULOS Essential DSP Implementation Techniques for Xilinx FPGAs ONLINE, for the implementation they use an Artix series 7 DSP, the DSP48 It is what I want to focus on, it is a simple core and easy to understand, seeing the architecture diagram of the new Versal DSP it seems complicated and difficult to implement, Negate and pre-adder is added, also 58 bits Accumulate, more Wide 116-bits XOR in XOR22, XOR34, XOR58 and XOR116, and as if the new additions were not enough, it also has INT8 Vector Dot Product Mode!! They will definitely have to teach me, I would learn it in a university course or career, specifically for this DSP58, although I would not do it from the beginning, but I can import DSP48 designs to the new Versal, very interesting. Regarding the new Digilent board, I am interested in having the new Opal Kelly technology connection, the SYZYGY, I have seen it and it has the highest bandwidth, much more than the FMC+, this connector would allow me, for example, to add an AKM ADC 24 bits 96Khz module with balanced Combo XLR/Jack input, to test my design with a condenser microphone or Roland Fantom 07 Synth, I now have many possibilities with this new device. Thank you @JColvin 😄 What I would also like to know is the new Adept 2 control panel, is it complete? what are the differences with Opall Kelly Front Panel? Do I have the ability to use the Adept 2 API within MATLAB or Vivado? I would like there to be a compatible enclosure for this USB104 A7, because I already found it on Ebay and I am asking for it as I write these lines, so you will already have more info about me.

Thank you very much for your information Zygot, but given my interest, as long as the DSP48E works and the NetList is available, I can work without problems with MATLAB DSP HDL Toolbox, HDL Coder and HDL Verifier. I don't want interference, I don't need complications, just versatility and simplicity, to work as fast as possible. The Versal Premium board is much better for me because it has everything I need to implement my projects in different ways, but I don't think I'm in a position to mortgage my apartment to get the Xilinx VPK120 Evaluation Kit. I need something simple and fast, so that later I can scale up and have some luck to get into some technology project incubator, so for the moment I'm on my own.

Good afternoon people, I'm studying MATLAB, and I need a development board based on the latest AMD Xilinx model, the Artix UltraScale+, any of its variants, AU10P or AU25P, they would launch some plate model for Introductory Boards / FPGA Boards? Greetings.

Excellent answer Zimbot, I think there is audio interface with built-in calibration to use. As measurement equipment, you would have to look it up from their respective manufacturers, because dedicated devices are designed for manufacturers, not hobbyist developers like me.

The AP 515 is the best option, but look at this !! https://i.imgur.com/WG2gY1x.png Do you think I would spend such a fortune for my recording studio? These are quality control laboratory equipment from factories like Focusrite, Yamaha, Roland, Antelope, AVID, etc ... With that money I put together a great Pro Tools-based studio with a workstation. I need something simpler and simpler to test my equipment, and then implement them in my DSP developments, I wish I had an industry behind me, but I have to accommodate my budget.

Hello people, I have in the Amazon shopping cart, the new Analog Analyzer ADP3450, it is the most complete to date, but I want to make sure that it will serve for the use that I will give it. What I want to do is a complete analysis of the audio of my audio interfaces, both in analog and digital response, as complete as possible for industrial production, as shown in the image. Possibility to analyze the signal with 24-bit depth, 768kHz for industrial environments, SDK for Matlab and the following list of measurements: Acoustic Response Bandpass Level Bandpass Level Sweep IMD Frequency Sweeps Polar Plots Crosstalk Sweep, 1 Channel Driven Q-peak Noise Crosstalk Sweep, 1 Channel Undriven Input Sample Rate Regulated Frequency Sweep Crosstalk, 1 Channel Driven Crosstalk, 1 Channel Undriven Crosstalk, Custom Measurement DC Level DC Level Sweep Digital Error Rate Dynamic Range / SNR (AES17) Frequency Response IC testing for I2S, SPI, DSP, I3C, McASP, SLIMbus, custom IDM (Intermodulation Distortion) Impedance/Thiele-Small Interchannel Phase Jitter Level Level Ratio SNR Maximum Output Level Maximum Output per CEA-2006 Measurement Recorder Modulated Noise Multitone Analysis Noise Noise Recorder SINAD (Signal-to-noise and distortion ratio) Stepped Frequency Sweep THD+N (Total harmonic distortion and noise) Transfer Function Is it possible that I can modify the device for these kinds of solutions? either through Matlab or Labview with WaveForms SDK, and if it is possible to connect the equipment to be analyzed using BNC-Jack or BNC-Toslink Optical adapters. My cordial greetings.

Hello people, I love being here, I have an idea to turn it into a project, I hope I am lucky to have good results, I am not an engineer, I am a programmer, hopefully I will learn visual development quickly. Greetings to all, behave well.