-
Posts
538 -
Joined
-
Last visited
Reputation Activity
-
Bianca got a reaction from Alexandre_Borali in JTAG-SMT3-NC different ranges of temperatures.
Hi @Alexandre_Borali,
I know it seems weird. We normally set our temperature grade for our products to be inclusive for the most sensitive component. In the specific case of this product we conducted some operational tests at higher temperature range. Upon these tests we updated the documentation with the new range for the operational temperature of the device.
However, we didn't have a way to make the tests for the storage temperature, therefore we updated just what we were able to test and left the other one as per specifications of the datasheet for the most sensitive component.
This is where the discrepancy comes from.
Best regards,
Bianca
-
Bianca got a reaction from Bruce_W in Power Good LED (LD11) Blinking on Arty A7-35T
Hi @Bruce_W,
If the LED is blinking it means that the 3.3V power supply is not working constantly. I don't know if with a multimeter we can see the behavior, probably just with a scope, but if you have a voltmeter/multimeter, please try to measure the voltages on, C208, C176 (or C177) and C178 (or C179) while you power the board from the PC with the USB cable. It will average the values, but if the power supply is that unsteady, you might be able to see some fluctuations. There's an overcurrent protection IC on the path when using USB power. I suspect that to be the cause of the problem.
Bianca
-
Bianca got a reaction from JColvin in How to restore FT2232 EEPROM back to factory settings?
Hi @svet-am,
This solution works just for the Digilent boards. Please contact Xilinx for support in order to fix your KCU1500 board.
Best regards,
Bianca
-
Bianca got a reaction from Chouchene in JTAG-HS2 firmware erased by accident
Hi @Chouchene,
You have a private message.
Regards,
Bianca
-
Bianca got a reaction from elizegi in How to restore FT2232 EEPROM back to factory settings?
Hi @elizegi,
You'll have a private message in a few minutes...
Regards,
Bianca
-
Bianca got a reaction from James.b in How to restore FT2232 EEPROM back to factory settings?
Hi @mixsemi,
Please see your private messenger.
Best regards,
Bianca
-
Bianca reacted to Taufiq Suyadhi in Welcome!
Hi all,
My name's Taufiq.
I still newbie on FPGA. My Basys3 has came on several days ago. I hope this forum will bring me useful knowledge & experiences.
Thanks.